Tunnel Led Lighting Characteristics:
- For using In mines, hazardous by gas (methane) or coal dust
- Temperature for storage and transportation: ± 40 C
- Operating Temperature: - 10 / +20 C
- Relative humidity,%, at a temperature of + 40 ° C: - till 100%
- Rated supply voltage: 12V/36V/110-130V AC /220-240VAC
- Luminous flux, Lm / m: 2000
- Color temperature, K: 3000K/4000K/5000K/6000K/7000K/10000K
- Lighting angle, degrees: 180
- Number of LEDs, pcs / m: 60-80 LEDs/m
- MTBF: 45000 H
- Degradation of luminous flux,% / year: 5-7%
- protection against dust and moisture: IP68
- LED Strip Housing Material: Silicon, flame retardant.
- Surge and surge protection
- Power driver : 240W/480W/750W
Main Parameter of SaferTunnels LED Lighting :
||72 LED's spaced evenly over a meter length
|Recommended fixing height
||5 - 6 Metres
|Power Consumption per LED
|Power Consumption per Metre
|Color Rendering Index CRI
||2362 Lumens / M
|The voltage on lighting VAC
||15%-20% Drop over 4 years
||Food grade silicone
||1000mm(length) *20mm(width) *10mm(height)
||-40℃ to 120℃
LED Lighting In A Continuous Line For Safer Tunnels Pictures
5050 SMD Led Strip Lights
Most conventional underground mining lighting systems lose up to 50% luminescence within the ﬁrst 4 to 6 months and rarely last beyond the 12-month mark.
Green Lighting LED Strip Lighting uses highly specialized components making it able to withstand being continuously energized. Green Lighting LED Strip Lighting functions at optimal eﬃciency in the most challenging environments for long periods of time. The light output lost is marginal at ±5% per annum for the ﬁrst four years, thereafter stabilizing at ±1-2% per annum.
Our plug and play system of 5050 Smd Led Strip Light
Conventional lighting requires separate power and a wired connection to every lamp, needing the expertise of electricians. This becomes labor-intensive and costly when running many meters of lighting. The GREEN LIGHTING LED Strip Lighting plugs into an existing power source using a power supply which then connects to one end of the LED strip.
Maintenance-free. Easy to repair of 5050 Smd Led Strip Light
Damage to lighting through routine underground activities happens. When a conventional lamp is damaged, it results in loss of illumination over many meters – making the affected area a safety hazard until repaired by a qualified electrician. Should a section of the GREEN LIGHTING strip light be damaged, only this section loses light. The remaining portion of the strip continues to provide illumination – allowing for a safer environment. Additionally, damaged sections can be replaced in 8" strips – making it a quick and cost-effective fix.
Reduced maintenance requirements of 5050 Smd Led Strip Light
By comparison, the working life of a ﬂuorescent light is signiﬁcantly shorter than ﬁve years and therefore requires more frequent changing out of the light source, more maintenance activity, and potential operational impact.
LED Strip Lighting does not typically fail catastrophically, as is usually the case with ﬂuorescent lighting, but rather the light output generally decreases over time. This allows for a regular maintenance schedule and replacement prior to failure, maintaining consistency of lighting and improving safety underground.
The optimum solution for mining illumination, Green Lighting LED Strip Lighting is made of a high grade, ﬁre retardant soft Silica Gel and is IP68 rated, making it compact and robust.
underground tunnel lighting Strip FAQ:
Q: Could I put my own logo on the products?
A: Sure, your logo can be put on every strip light, either by laser or by molds.
Q: Could I put my own designs on the products?
A: Of course, you can send us your design, we'll follow your design.
Q: Can I have some samples before the formal order?
A: Yes, we can send you some free samples for your test before your order.
Q: How long is the lead time?
A: Normally we keep stock for most products, the lead time is 1-5 days as soon as the payment is released. For customized products, it takes longer.
Q: How about the after-sale service? What are the Warranty terms?
A: We offer 12 months for every product we sold. If you meet any problems after sales, pls contact us freely, we'll help solving the problems within 24 hours.
Q: Are you a manufacturer or just a dealer?
A: We're manufacturer, we do produce all products by ourselves. Welcome to visit our plant at any time.
Q: What are the payment terms? Can I pay after you got the products?
A: Normally we accept TT and western union. L/C, Paypal is also accepted if the order quantity is large. For old customers, we'll guanartee monthly payment after good cooperation ship.
Q: I couldn't find the products I want in your catalog, can you develop it for me?
A: Yes, we have a research & development dept., we're willing to develop everything that you demand in safety lockout industries.
Q: Do you have any offices in other countries?
A: Currently we don't have, but we're discussing with some good customers. If you're willing to be our agent in any countries, pls contact us freely.
Q: May I take goods by air?
A: yes, you can by air, express, sea up to options.